Soundpeats T2 Wireless Headphones - User Guide

How to connect the Earbuds to a Phone

1 .When the charging case is powered, open the charging case, then both Soundpeats T2 earbuds will enter pairing mode automatically. You will see the indicators flashes in blue and white.

2. Activate Bluetooth on the device, and choose "SOUNDPEATS T2" on Bluetooth list to pair.

How to Reset Soundpeats T2 Earbuds

1 .Place back both Soundpeats T2 earbuds into the charging case and make sure they are in charging status.

2.Click both multifunctional buttons five times until LED indicators of earbuds flashes in blue and white twice.

Wearing

The correct wearing of Soundpeats T2 headphones is shown in the picture.

How to control the Earbuds

Power On
Automatically: Open the charging case 
Manually: Long press the multifunctional button for 1.5s

Power off 
Automatically: Place Soundpeats T2 earbuds back into the charging docks and close the charging case 
Manually: Long press the multifunctional button for 10s

Play/Pause 
Double click the multifunctional button

Volume- 
Click the left button once

Volume+ 
Click the right button once

Next Track 
Long press the right button for 1.5s

Answer/Hang Up Phone Call 
Double click the multifunctional button

Reject Phone Call 
Long press the multifunctional button for 1.5s

Switch Between Two Active Calls 
Long press the multifunctional button for 2s

Manually Enter Pairing Model 
Long press the multifunctional button for 6s

Activate Voice Assistant 
Triple click the multifunctional button

Smart Noise Cancellation 
Long press the left button for 2s

Transparency Model
Long press the left button for 2s

FAQ

What do the charging LEDs tell while charging the case?
When the left Soundpeats T2 earbud is placed into the charging case, the first LED indicator flashes, which means the left earbud in charging status.
When the right earbud is placed into the charging case, the third LED indicator flashes, which means the right earbud in charging status.
When both of the earbuds are placed into the charging case, the first and third LED indicators flashing, which means both earbuds in charging status consistently.

When charging for the charging case, what's the LED lights indicate?
When the battery level of the charging case is 0%-19%, the first LED at the bottom flashes in white
When the battery level of the charging case is 20%-69%, the first LED at the bottom lights up in white and the second LED flashes in white
When the battery level of the charging case is 70%-99%, the second LED at the bottom light up in white and the third LED flashes in white
When the battery level of the charging case is 100%, all three LEDs at the bottom light up in white

What shall I do to charge for the charging case?
1 .Connect the charging port with Type-C charging adapter. (Please make sure the current is not Greater than IA) If the LED indicators flash, which means a charging status.
2. Please charge the case at least once every 3 months when not in use for a long time.

Why are Soundpeats T2 earbuds still connected to my phone after placing back?
1. The charging case is out of battery. The case will not turn off the earbuds if the case battery dead.
2. Please make sure the earbuds are placed properly in the charging case. And wipe the charging metal sheet and pin needle with a microfiber cloth to keep charging connectors on both the earbuds and charging case clean.

Why the battery life is not as advertised?
A single charge of the earbuds will not give you 30 hours playtime constantly. The earbuds work around 10 hours per charge with average use. The charging case provides another 2 recharges.