Anker Soundcore Life P2 Bluetooth Earbuds - Manual

Charging (Anker Soundcore Life P2 Bluetooth Earbuds)

- Remove the protective film from the earbuds when using for the first time.
- Fully charge both Anker Soundcore Life P2 Bluetooth Earbuds and the charging case before the first-time using.
- To prevent damage, use the provided USB-C cable.
- Fully dry off the earbuds and the USB port before charging.


LED behaviour (Earbuds & Charging case)

Steady white Being Charging
  Light off - Fully charged
- Remaining battery >10% (when in use)

Powering On/Off (Anker Soundcore Life P2 Bluetooth Earphones)

The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.  


LED behaviour (Earbuds)


ON Steady white for 1 second
OFF   Steady red for 1 second

- To manually power on, press the multi-function button on either one of the earbuds.
- To manually power off, press and hold the multi-function button on either one of the earbuds for 3 seconds.

Pairing

True Wireless Stereo Connection

The right earbud will automatically connect with the left earbud when taken out of the charging case.

LED behaviour (Earbuds)

Breathing white TWS connecting

 
Steady white for 1 second TWS connected

- When powered off, press and hold the multi-function button on both earbuds for 1 second, the earbuds will enter TWS connecting mode.
- When powered on and connected, place either one of the earbuds into the charging case, you can keep using the other one.
- When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
- When you are on a call, place either one of the earbuds into the charging case, 3 to 5 seconds later, the microphone in the other earbud will be activated.

Bluetooth Pairing with your Device

Anker Soundcore Life P2 Bluetooth earbuds will enter pairing mode when powered on. You are requested to confirm the connection when you see a pop-out screen.


LED behaviour (Earbuds)


Flashing white Bluetooth pairing
  Steady white for 1 second Bluetooth connected

In the pairing process, some devices are incompatible with Qualcomm True Wireless PrimarySecondary dual pairing names, it may notice "connection unsuccessful" when you tap “Pair” or even no screen popped out. Don't worry and it will not influence the using.

Once successfully paired, the primary earbud connects with your device and transfers signal to the secondary earbud, the latter one will not connect with your device. As a result, in the Bluetooth pairing list on your device, it may indicate that only one side is connected while the other side is not.

- To pair with another Bluetooth device, turn off Bluetooth on the currently connected device first.
- Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

Wearing

1. Choose the ear tips that fit your ears the best. 
2. Insert the earbuds into the inner canal of your ears. 
3. Turn and find the most comfortable position.

Controls (Anker Soundcore Life P2 Bluetooth Earbuds)

Play / Pause Press (R/L)
Next track Press twice (R)
Previous track Press twice (L)
Volume up / down Control volume via the connected device
Answer / End a call Press (R/L)
Reject a call Press and hold for 1 second (R/L)
Enable mono mode Remove either one of the earbuds off your ear and press and hold the button on the other earbud for 1 second
Activate Siri or other voice assistant software Press and hold for 1 second (R/L)

Reset

Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.

1. Place the earbuds into the charging case and make sure they are being charged.

2. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white.

- All the memory data will be cleared. 

Specifications

Specifications are subject to change without notice.

Input 5 V 500 mA
Rated output power 7 mW @ 1% THD
Battery capacity 55 mA x 2 (earbuds); 700 mA (charging case)
Charging time 2 hours
Playtime (varies by volume level and content) 7 hours (Totally 40 hours with the charging case)
Driver size 6 mm X 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Bluetooth version V 5.0
Bluetooth frequency 2402-2480 MHz
Audio codec format SBC, AAC, aptX
Bluetooth range 10 m / 33 ft

 

Read also

Huawei FreeBuds 3 Earbuds User Manual

Honor FlyPods Lite - Manual

 

© 2020 Video surveillance systems. United Kingdom